What is the torque setting?
Think of torque settings like a clutch in a car. When you press the clutch pedal all the way in the wheels on the car lose power and speed. When you release the clutch pedal all the power goes to the wheels and they spin faster.
Do torque settings matter?
No, it doesn’t matter at all. Unless you expect your car to be safe and reliable. The specified torque for wheel nuts is important. Too loose and you risk them loosening on their own, obviously a dangerous situation.
Do head bolts have to be torqued?
In most cases you don’t need to retorque head bolts or studs. If the bolts or studs aren’t tight you will lose compression or get coolant in your cylinders. You can use bolts or studs based on application, but studs tend to give more consistent torque values. Never reuse Torque-To-Yield (TTY) bolts.
Where can I find torque settings for my car?
Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
What should I torque my wheels to?
Under- or over-tightening wheel-attaching hardware can be damaging and dangerous.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 12 x 1.25 mm | 70 – 80 | 8 |
| 14 x 1.5 mm | 85 – 90 | 7.5 |
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
What happens if you don’t torque?
In the case of insufficient torque, it’s the stud or the bolt itself that suffers all the impact, causing it to shear. Alternatively, the engine’s vibrations can cause the bolt or nut to come undone, displacing the tensioner.
What happens if cylinder head is not torqued?
Another consequence of failing to torque the head bolts properly can be head warpage. Uneven loading created by unevenly tightened head bolts can distort the head. Over a period of time, this may cause the head to take a permanent set.
What happens if you dont torque?
Insufficient torque Alternatively, the engine’s vibrations can cause the bolt or nut to come undone, displacing the tensioner. This, in turn, will lead to incorrect belt tension and, eventually, to belt and/or engine damage.
Where do I find torque specs for my car?
The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can’t find that information, or if you don’t have a guide, you can find the specs in the service manual.
What torque should lug nuts be?
How do I know how much torque I need?
Torque is defined the length of the lever arm multiplied by the force applied. For instance, if you have a two-foot long bar and you hang a 10-pound weight from it, you have 20 foot/pounds of torque.
How do I find the torque specs for my car?
How do you check torque?
After fastening the bolt, make use of a torque measuring tool to mark off the tightened bolt and the product/workpiece. Apply additional force in the tightening direction until movement is noticed. Recording the reading will indicate the residual torque originally applied to the joint.