Are Siemens Deka injectors good?
They arrived in good shape and upon inspection they are 100% genuine (you get what you pay for). I installed these in my turbo E30 running Megasquirt EMS and they work stellar. Each injector has a serial number on it, so I know they are the real deal.
What are EV6 injectors?
USCAR ( EV6 ) Style Female Fuel Injector Connector This is a very common fuel injector connector and is used on many newer model vehicles, especially most GM, Ford, and Chrysler vehicles manufactured since 2006.
What is the difference between EV6 and EV14 injectors?
The EV6 injector is nearly identical in height but the body of the fuel injector is narrower or “skinnier” when compared to the EV1 injector. The third style is the EV14 fuel injector. The EV14 injector is shorter than the EV1 and EV6 injectors and features a slim style body.
Which is better high or low-impedance injectors?
That low-amp current keeps the injector temperature lower, which makes it more reliable; that’s why the high-impedance design is the most common injector style for OEM applications. Low-impedance injectors, also called peak-and-hold injectors, are sent a more powerful electrical signal, usually around 56 amps, to open.
Are LS1 and LS6 injectors the same?
They are the same overall length as the stock LS1/LS6 injectors, and the injector connector is an LS2-style. However, all of the injectors do include a plug-and-play harness to adapt the fuel injectors to the factory LS1/6 (EV1) connector.
What size are LS3 injectors?
The stock LS3 injectors are 42lb injectors and are more than adequate for about 500-525 rear wheel.
Are LS1 and LS2 injectors the same?
The factory LS1 injectors are approximately 1/4″ taller than the factory LS2 injectors. They also have smaller bottom o-rings then a LS2 style injector. Using a LS2 bottom o-ring on a LS1 injector it will cause a fuel leak because the ID (inner diameter) is a different size.
What size injector do I need for my LSJ?
Supports up to 350WHP supercharged or 400WHP turbo. They work with gas or E85, but we recommend 80’s when using E85. These injectors require our injector harness for use in the LSJ 2.0L Ecotec application which will have to be purchased separately.
What is a high impedance injector?
This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
What size fuel injectors do I need for Ecotec?
They work with gas or E85, but we recommend 80’s when using E85. These injectors require our injector harness for use in the LSJ 2.0L Ecotec application which will have to be purchased separately.
Do ZZP injectors work with gas injectors?
They work with gas or E85, but we recommend 80’s when using E85. These injectors require our injector harness for use in the LSJ 2.0L Ecotec application which will have to be purchased separately. All ZZP purchased injectors come with dielectric grease and are packaged in a reusable plastic case to store your factory injectors safely.