How do I setup a D Link DNS-323?
Your setup may look slightly different.
- Configure the DNS-323 for access from your network.
- Go to Setup > Device.
- Browse into the DNS-323 using Windows Explorer and create the directory structure you wish to use.
- Log into the DNS-323 configuration pages and go to Advanced > Users.
- Go to Advanced > Network Access.
How do I setup my DNS 320L?
D-Link DNS-320L Quick Install Guide Manual Installation
- Remove the top cover of your device by pressing the push button in and then lift the cover up.
- Attach the strap to your hard drive(s) with the supplied screws.
- Insert one or two 3.5” SATA hard drive(s) into the drive bay until they are firmly seated.
How do I access my DNS 320 from the internet?
How to Access the Web Interface of the DNS-320 Remotely using D-Link Router
- Put a check mark on the row to enable the rule.
- Enter a name for the policy you would like to create.
- Enter the IP Address of the DNS-320 (On Step 2)
- Enter Port 80 both on Public and Private port.
How do I setup a static IP address on my Dlink router?
Here’s how to do it in five easy steps:
- Fire up your D-Link router’s Web configuration screen and click on its Setup tab.
- From there, click on Network Settings on the sidebar.
- Scroll down to the Add DHCP Reservation section, check the Enable box and add your device’s name.
- Add your device’s IP Address and MAC Address.
How do I setup the dns-323?
The Wizard is an easy to use utility for basic setup of the DNS-323. Here you will configure the administrator’s password, time, LAN connection type, and additional settings of your DNS-323. Step 1: Click ‘Run Wizard’ to begin.
How do I check for new firmware on the dns-323?
The DNS-323 Firmware menu makes it simple to check for new firmware releases and upload them to the device. This section provides a link to check for new firmware on the D-Link support website. If a new firmware is available, download the file to your local computer.
What is the dns-323 AV server?
The DNS-323 features a UPnP AV Server. This server provides the ability to stream photos, music and videos to UPnP AV compatible network media players. If the server is enabled, the DNS-323 will be automatically detected by UPnP AV compatible media players on your local network.
What is the LAN link speed for the dns-323?
The LAN Link Speed is set to Auto by default, but can be manually set to 100Mbps or 1000Mbps. Selecting DHCP Client will cause the DNS-323 to obtain an IP address from the local DHCP server.